DIY Fidget Spinner Mod 1

DIY Hand Spinner Mod1

How to make a Fidget Spinner or Hand Spinner from some old stuff in the garage. You don´t need a hacksaw to get the bearings out try to push them out instead.

Material Used:

  • 3 x 22 mm Steel Bearing
  • 1 x 26mm Steel Bearing
  • 3x Cap from old cartridge
  • Super Glue

** I would recommend using Ceramic bearings instead, you will increase the spinn time alot **
** Can´t find the glue im using but something like JB Weld or Metal Epoxy should work **

Here are some Amazon Affiliate Links. You might find better deals if you buy in bulk or not.

Want to see the full build?

Check it out on YouTube!